Tea for the Tillerman

 

We had a weird Covid overshadowed Christmas that gave me some time for thinking, and I realised I have been dodging a number of jobs that need doing. I gave myself a good talking to, and started in on the tiller for the Scamp.  It's a really important part of the build, the key interface between human and boat and the magical forces that enable you to sail. 

Dale Simonson, a Canadian Scamp builder who I met on the Tawe Nunnagah earlier this year, has published a nice plan for a SCAMP tiller. John Welsford is a bit vague in the boat plans - "tiller to suit" - so nice to have something a bit more specific to work from. I ripped some Oregon and some super dense hardwood that Harald up the road gave me, and clamped the strips onto a frame made to Dale's measurements. I think it will do.

The wood in the tiller certainly looks lovely under a coat of epoxy.

Meantime, the hull is painted, looking rather like a Christmas decoration. And I sikaflexed  the hdp nose protectors onto the skegs, another one of the jobs I have been dragging the chain on. I don't know if they will work but I figure I can try something different pretty easily if they don't. 

So, a few jobs ticked off the reluctance list. Still plenty to go but getting closer. End of next month we should be pretty close with luck. Here's my to do list. Notice how often the word "Sand" appears.

Cameron, the chap I sold the Core Sound to, has just put it up for sale. Which has caused me to, once again, wonder if I actually made the right decision selling, and going down the SCAMP build path. I won't really know for sure of course till I am actually sailing, but I think I made the right call. The mast on SCAMP is about half the weight of the Core Sound, and raising it is much safer.  I never capsized the CS, but I suspect I would have had trouble getting it back and me in. By all accounts the SCAMP is less likely to capsize, and much easier to recover.  I did love the Core Sound, but it will be special to be in a boat I have built myself.

I have been sifting back through the various comments from SCAMP owners on the SCA substack. There is a common thread of agreement that the SCAMP is an easy boat to rig, launch, move around, retrieve, and generally be with.  I said to Anne today I hope I get 10 years sailing out of it.   

 Meanwhile I still enjoy the Skerry. Andrew invited me last week to head out from AYC, and Chris, after our lake wendouree adventure, very bravely agreed to come along. With luck, and if the weather holds, Anne has agreed to come out for a sail with me Friday.  Being on the water is a reminder of why I am building that boat. It is not because I love sanding.

Slacking off

 I admired Kent from Kent's Bike Blog, who, when asked his approach to the gruelling Great Divide bike race, which he completed on a fixed gear single speed bike, responded: "I start off slow, then kind of ease off." I have been emulating his approach all too well as my lack of progress shows. Summer is beginning and with it some lovely weather. I went  sailing in the Skerry, with Andrew in his Laser, on a lovely broad reach over to Williamstown and back, I 've been swimming most days, making jam, and generally pottering around. Very pleasant but my hopes that the SCAMP would somehow magically be ready for sailing this year are pretty much out the window. 

It was great to get back on the water. It was a North wind day, with flukey gusts varying in direction by up to 90 degrees. The sort of day where you could easily wind up in the water. It was a good reminder of why I am building the SCAMP: I hope it will be a bit more relaxing to sail on that sort of day than the Skerry is.

I did get the boat turned over, thanks to a gang of excellent helpers who made the operation, which I had been dreading, extremely easy. 

There is quite a bit to do once the boat is turned over, filling, fibreglassing and adding the skegs. Those darn skegs took me more than a week to laminate, fibreglass, cut gooves, attach worm shoes, epoxy onto hull and fillet. 

This week I collected a length of aluminium tube, 6060 t5 80mm 2mm wall thickness, as recommended by Dana Pike up in Canberra. I can try my hand at a birdsmouth somewhere down the track, I want to go sailing!!!!  The tube is intimidatingly big, but weighs under 5 kilos. My mast on the Core Sound weighed over 11 kilos, and I had to stand precariously on the front deck to insert it vertically into the mast box. I think the SCAMP arrangement should be much better. I've laminated some bits of Harald's Oregon to make the boom, and I will try carbon fibre wind surfer mast for the yard. So we might be able to bend on the sails soon. In between , while waiting for glue to set or just for a change, I am shaping the rudder,a few more hours rasping and sanding and that will be done too.

The SCAMP manual suggest filleting and painting interior while the boat is upside down, so that's next. A bit of a contortionist challenge to get to some areas but hey ho, we're getting there. Maybe January we might be ready to launch.